The CENTROSOLAR E-Series PV Module was developed with the highest quality standards for professional commercial installations. Manufactured by our partner in China, and engineered, developed and tested under our strictest quality standards, this product has
already been installed in many applications.
The CENTROSOLAR E-Series module consists
of 72 polycrystalline high-efficiency silicon cells, allowing higher power output per module,
up to 275Wp. This allows unique advantages
for most applications, reducing installation and
balance-of-system costs.
The CENTROSOLAR E-Series has been designed
to meet the highest demands and to resist rigorous climatic conditions in North America - including ice, hail, snow, storm, high humidity
and intense thermal fluctuation. Neither heat nor cold can harm the CENTROSOLAR E-Series. It makes optimum use of available solar energy reliably, in order to generate very high yields of power.

Energy from High-Performance Products
The CENTROSOLAR E-Series is manufactured with an anodized aluminum frame with hexagon drainage holes and grounding hole on four sides. The modules are made with high quality raw materials, including top branded EVA and triple-layer back sheet and high-transparency low-iron impact-resistant tempered glass.
Premium Quality
Proven field performance on MW-scale ground mounted projects in Europe
Confirms to UL 1703, IEC and CE standards
Manufactured by partner under highest quality standards using German process techniques
CENTROSOLAR quality inspection of manufacturing process in China
Separate measurement of every single CENTROSOLAR module after the production process is complete
Unchangeable serial number (laminated onto the front and back)
Internal by-pass diodes across 24 series cells resists effects of shading

CENTROSOLAR guarantees to refund or replace modules if power losses exceed 10% within 10 years and 20% within 25 years (please refer to standard warranty agreement). We stand behind every solar module that leaves our warehouse, including a 5 year workmanship warranty.
Module Certificates
UL 1703, cUL, CE Compliant, FSEC Approved

E275 Peak Power (Pmax)*               275 Wp
Cell Type                                           poly
Power Tolerance                              -1/+3 %
Number of Cells in Series                 72
Voltage at Maximum Power (Vmp)   36.72 V
Current at Maximum Power (Imp)      7.49 A
Open Circuit Voltage (Voc)               43.78 V
Short Circuit Current (Isc)                 7.96 A
Series Fuse 12 A
Maximum System Voltage 600 V
Temperature coefficient (Pmax) -0.488 %/ºC
Temperature coefficient (Voc) -0.346 %/ºC
Temperature coefficient (Isc) 0.065 %/ºC
Nominal Operating Cell Temp. 45.3 ±2 ºC
Output Cable #12AWG (4 mm) x 43.3” (1100 mm)
Connector Plug TYCO SOLARLOK
Load Rating 45lbs./fts PSF
Weight kg (lbs) 23.0 (50.7)