OutBack FX2012T Inverter 2000 Watt, 12 Volt, 120 VAC/60 Hz Features

The FX series is designed to survive in environments that would normally destroy other inverter/chargers. Protection for internal components is provided by our die-cast aluminum chassis with a powder coated fi nish to prevent corrosion. Internal and external cooling fins allow for passive heat transfer, enabling peak operating efficiencies as high as 93% and looking cool while doing it. Water and small particles are kept out through the generous use of gaskets and 0-ring seals on all seams and openings. A protective conformal coating on all circuit boards provides the final line of defense against corrosion. The now standard externally mounted “TURBO” cooling system improves performance in hot conditions.

• Powder-coated all aluminum die-cast chassis
• Internal electronic components are cooled by heat transfer
• Gaskets on all openings to provide water resistance
• Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold, etc.
• Conformal coated circuit boards to resist corrosion
• Designed to allow easy field servicing and repair

Applications

• Hot and humid climates where a protected area is not available for installation of the inverter/charger system
• Salt air environments such as Hawaii where you can't get away from the salt air and where there is little difference between indoors and outdoors
• Dirty environments where dust or drifting organic matter such as cottonwood could clog air openings in an unattended system
• Boats and RV's where water might splash on the inverter
• Greater control of unwanted radio frequency interference

Specifications
Continuous Output Power: 20000 VA
Continuous Output Current at 25 degrees: 17 amps AC RMS
Idle Power (120 VAC Output No Load): 19-21W DC
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC
Peak Efficiency: 91%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 100 Amps DC
Frequency Range: 50-70 Hz
DC Input Voltage Range: 10-16 VDC
Dimensions (HxWxL): 13" x 8.25" x 16.25" / 33 x 21 xz 41 cm
Weight: 62.6 lbs. / 28.4kg