Outback Mate Remote Monitor and Control Features

The OutBack MATE is a complete system controller and display for both the OutBack FX2000 inverter/charger and MX60 MPPT PV charge controller. It provides a display of the operation as well as allows control and adjustment of the setpoints. The OutBack Mate also coordinates the operation of the entire system to maximize performance and to prevent multiple products from conflicting.

A single OutBack MATE is able to connect to multiple FX2000 inverter/charges, MX60 MPPT PV charge controllers and any other OutBack power conversion and control products offered in the future. A maximum of ten OutBack products will be able to be connected to a single MATE via CAT 5 / ethernet type cabling with 8 wire RJ45 modular connectors and the OutBack HUB communication manager.

The OutBack MATE includes a 4 line backlit LCD display with 80 alphanumeric characters. This allows multiple measurements to be displayed at the same time and reduces the amount of abbreviations required, simplifying the operation and reducing confusion. All of the programmed setpoints are stored in permanent memory to eliminate the need to reprogram the system after a shutdown or battery replacement.

The OutBack MATE also includes a built-in real-time clock and calendar which allows programming of the inverter operation based on the time of day and even day of the week. This can be used to allow the system to work with time-of-day power rates or to limit a generator's run time to a specific period of the day or week.

The OutBack MATE also includes an opto-isolated RS232 port with a DB9 jack for connection to the serial port of a PC computer.

• Grey
• Surface mount with RS232
• Interface Display: 3.1" (8cm) backlit LCD
• Control Keypad: 6 backlit silicone keys - dedicated inverter and AC input keys
• Status Indicators: Two LED Status Indicators
• Communication Protocol: Proprietary OutBack Multi-drop using an OutBack HUB4 or HUB10
• Interconnection Cabling: Standard CAT5 network cable with RJ45 modular jack - 50' (15m) included
• PC Computer Interface: RS232 opto-isolated DB9 jack 9600 baud serial communication
• Microprocessor: 16 MHz low power consumption version
• Set point and Data Memory: 32K non-volatile flash RAM
• Clock/Calendar: On-board real time clock with battery backup
• Environmental Rating: Indoor Type 1
• Maximum Cable Length: 1000' (300m)
• Warranty: Standard 2 year / Optional 5 year
• Shipping Weight: 1 lbs / 0.5 kg
• Shipping Dimensions (HWL): 5.75" x 4.25" x 2" / 12 x 11 x 5 cm