The MM-E Series Inverter/Charger for Renewable Energy Applications is the cost effective solution for smaller power needs.

A remote control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered.

Power Factor Corrected (PFC) Charger:
Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC currnt than standard chargers.

Battery temp sensor: The standard battery temp sensor monitors temperatures from 0-50 degrees C.

Versatile Mounting: Mount the MM-E Series on a shelf, bulkhead, or even upside down.

Fan cooled: The MM-E Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.

Battery and inverter protection: The MM-E Series protects your batteries and itself with low battery, high battery, current overload, and circuit breaker protection.

Convenient switches: The MM-E Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.

Accessories and Options: Remote Control: The optional ME-RC and MM-RC remotes are available for the MM-E Series. A four wire phone jack comes standard with the unit to connect the remote.

Inverter Specifications
Input battery voltage: 18 to 32 VDC
Nominal AC output voltage: 230 VAC +-5%
Output frequency and accuracy: 50 Hz +- 0.4 Hz

1 msec surge current: 42 amps AC
100 msec surge current: 14 amps AC
5 sec surge power: 2600 real watts
30 sec surge power: 2100 real watts
5 min surge power: 1850 real watts
30 min surge power: 1650 real watts
Continuous power output at 25C: 1300 VA
Rated input battery current: 87 ADC
Inverter efficiency: 87%
Transfer time: 16 msecs
No Load (120 VAC output): 18 watts

Waveform: Modified Sine Wave

Charger Specifications
Continuous output at 25C: 40 ADC
Charger efficiency: 83%
Power Factor: >0.95
Input current at rated output: 5.5 AC amps

General Features and Capabilities
Transfer relay capability: 20 amps AC

Five stage charging capability: Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver

Battery temperature compensation: Yes, 15 ft Battery Temp Sensor included

Remote available (optional): Yes, MM-RC, ME-RC
Internal cooling: 0 to 59 cfm variable speed
Over-current protection: Yes, with two overlapping circuits
Over-temperature protection: Yes on transformer, and MOSFETS
Low battery cutout: 10 or 20 VDC, adjustable on most modules with the ME-RC remote
Output circuit breaker: 7 AAC

Input circuit breaker: 8 AAC
Listings: NA
Warranty: Two (2) years

Environmental Specifications
Operating temperature: -20C to 60C (-4F to 140F)
Non-operation temperature: -40C to 70C (-40F to 158F)
Operating humidity: 0 to 95% RH non condensing

Physical Specifications
Mounting: Shelf (top or bottom up) or bulkhead (vents up)
Max operating altitude: 15,000' (4570m)
Construction: ABS plastic top and cast aluminum bottom

Dimension (HWD): 15.0" x 6.5" x 5.0" / 381 x 165 x 127 mm
Weight: 25 lb (10.4 kg)