Magnum 2000W 12V Inverter/100Amp PFC Charger ME2012 Features

A remote control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered.

Optional Remote Control pictured here must be ordered separately.

The ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.

Safe and reliable: The ME Series is ETL listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.

Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.

Power Factor Corrected (PFC) Charger: Our PFC Charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger- using onlt 15 amps per 100 amps versus 23 amps used by standard chargers.

Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you.

Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.

Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Muliple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

Accessible design: The extra large AC access cover with terminal screw block and 360 degree DC connection terminals with covers make this inverter more accessible when it needs to be.

Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

Expanded transfer relay: 60 Amp transfer service is available on all models.

Buy with ease: The MSESeries is backed by a three-year (36-month) limited warranty.

Accessories and Options:

Remote Control: For convenient finger-tip operation, including the new one-knob programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.

Inverter Specifications

Input battery voltage: 9 to 16 VDC
Nominal AC output voltage: 120 VAC
Output frequency and accuracy: 60 Hz +- 0.005%
1 msec surge current: 60 amps AC
100 msec surge current: 37 amps AC
5 sec surge power: 3700 real watts
30 sec surge power: 3450 real watts
5 min surge power: 3100 real watts
30 min surge power: 2400 real watts
Continuous power output at 25C: 2000 VA
Rated input battery current: 191 ADC
Inverter efficiency: 95%
Transfer time: 16 msecs
Search Module (with remote): 0.2 ADC
No Load (120 VAC output with remote): 0.87 ADC
Waveform: Modified Sine Wave

Charger Specifications
Continuous output at 25C: 100 ADC
Charger efficiency: 85%
Power Factor: >0.95
Input current at rated output: 15 AC amps

General Features and Capabilities
Transfer relay capability: 2 legs at 30A for 120 V/30 A or 240 V/60 A service
Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver
Battery temperature compensation: with available temp sensor (battery temp 0 to 50C)
Remote inverter on/off witch: With available pigtail to connect to dry contact
Internal cooling: 0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Over-current protection: Yes, with two overlapping circuits
Over-temperature protection: Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection: yes
Powder coated chassis and top for corrosion protection: yes
Stainless steel fasteners for corrosion protection: yes
Dual AC branch rated output breakers: Optional on the ME2012- AC breakers in 15 or 20 amp ratings

Listings: ETL listed to UL/cUL 458, CSA C22.2 #107.1-01,

Warranty: Three years

Environmental Specifications
Operating temperature: -20C to 60C (-4F to 140F)
Non-operation temperature: -40C to 70C (-40F to 158F)
Operating humidity: 0 to 95% RH non condensing

Physical Specifications
Mounting: Shelf (top or bottom up) or bulkhead (vents up)
Max operating altitude: 15,000' / 4570m

Dimension (HWD): 13.75" x 12.65" x 8.0" / 349 x 321 x 203 mm
Weight: 38 lbs/17.3 kg