Morningstar SunSaver 10-24V Charge Controller
LVD-SS10L-24V
The MorningStar SunSaver line of controllers (8 models in all) have built-in temperature compensation, they are epoxy encapsulated, but are not outdoor rated since they have an exposed front mounted 7 position terminal strip. Units are available for 12 or 24V systems ranging in amperage capacity from 6-20 amps. The regulating voltage is adjustable for sealed or flooded batteries by simply removing/installing an included metal jumper between terminals 6 and 7. A green "charging" LED is standard on all SunSaver units while the units with the optional low voltage disconnect (LVD) for a DC load also have a red LED to indicate when the load has been disconnected to prevent the battery from being over discharged. Each terminal can accept up to two #10 AWG wires. It's dimensions are 6" x 2.2" x 1.3" and it weighs 8 oz.
Morningstar’s SunSaver is the world’s leading small solar controller for both professional and consumer applications.
SunSaver's Techonology Provides:
- Exceptional Reliability
- PWM Battery Charging
- Consistent High Quality
The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing:
- Automated production
- ISO 9002 quality programs
- Latest power electronic technologies
- Latest control and logic technologies
- High volume manufacturing
Features
- Eight versions available 12 and 24 volts 6, 10 and 20 amps
- 100% solid state
- Series design (not shunt)
- True 0 to 100% PWM duty cycle
- Setpoint accuracy to 35 mV
- Rated for 25% overloads
- Fully encapsulated in epoxy potting
- Marine rated terminals / anodized case
- Temperature compensation
- Sealed / Flooded battery select
- No need to derate
- Parallel for 40 amps or more
- Green charging / Red LVD indicators
Shipping weight: 1 lbs. / 0.45 kg
Shipping Dimensions (WLH): 2.75" x 7" x 1.5" / 64 x 178 x 38 mm
ss10L-24V
