BZ 250-Watt PV Control 12V/25A output w/ meter - Flush mount Features
PPT 250 HV and MPPT 250 Maximum Power Point Tracking (MPPT) PV Charge Controllers increase charge current by up to 30%. 15 % current boost is common. Patent pending design squeezes the last amp from your PV array without squeezing your budget. For new installations or upgrading present systems, the MPPT 250 and MPPT250 HV will make the difference. Conventional PWM Charge Controllers waste energy by tying the PV array directly to the battery. 20 to 30 % of your PV power is immediately wasted. The MPPT 250 and MPPT250 HV break the PV direct connection by electronically tracking the PV array Maximum Power Point and converting wasted power into higher charge current. All at about the same cost of conventional Charge Controllers. For maximum efficiency, they should have an input wattage of at least 68 Watts. They will operate with less input at lowered efficiency. A battery bank with a capacity of at least 100 Amp Hours is recommended.
- Current boosting Solar control.
- 12 volt output, CPU control
- 250 watt PV input 25 amps max.
- Metering, Aux batt charger, LVD
- 5 year warranty
